SINGLE PUNCH TABLET MACHINE

Description

This machine is a portable small equipment for compressing various granular powder materials into tablets. It is widely used for trial production or small batch production in the pharmaceutical, chemical, food, medical and other industries. It can be pressed into tablets of various shapes such as round, ring, triangle, star, etc. according to customer requirements.

Features

High cost performance.
The cast iron parts of the main structure are formed at one time, with high strength and firmness.
The feeder is made of 304 stainless steel, which has high hardness, is not easy to deform, and is durable. The large-angle design of the discharge port makes it easy for materials to flow.
The oil cup has a large capacity, no need to refuel frequently, which is time-saving and durable.
Scientific design, simple operation, no training required.
The equipment runs stably and the failure rate is extremely low, suitable for long-term production.
The machine has low energy consumption and can also be operated manually.
Small size, light weight, convenient transportation and maintenance.
The pressure and filling depth can be flexibly adjusted according to actual needs.

Technical Parameter

Model	IA-5T/TDP
Brand	IACHIEVE
Maximum pressure	50KN
Maximum tablet diameter	20mm
Maximum tablet thickness	6mm
Maximum filling depth	18mm
Production capacity (pcs/h)	4500pcs/h
Power	750w
Voltage	220v/50Hz
Dimensions	650 x 440 x 650mm
Weight	120kg

Other Machine Visual

The main structure
Pressure adjusting nut

Method: When you need to adjust the pressure, first manually turn the wheel to move the upper mold into the middle mold to prevent the position of the upper punch and the middle membrane from being released. Then loosen the nut marked in red in Figure 1 and turn to the left to increase the pressure. Turning to the right reduces stress. After the pressure is adjusted in place, use a wrench to hold the nuts marked in red in Figure 1 and Figure 2 at the same time, and lock them in the opposite direction.