Description
MACHINE OVERVIEW:
Our company customizes equipment for customers according to the actual situation such as the shape, specification and output demand of the packaging tray.
Foods packaged under modified atmosphere can maintain the original taste, color, shape and nutrition of the food well, and at the same time combine with its own food technology to achieve a longer freshness period.
APPLICABLE PACKAGING:
Fast food lunch box, fresh poultry meat, chilled fresh meat, seafood and aquatic products, cooked food braised, pickled vegetables, etc.
WORKING PRINCIPLE:
The principle of modified atmosphere fresh-keeping packaging: the cylinder of the execution system is controlled by the electrical control system to complete the steps of entry and exit of the lower mold, mold separation with the upper mold, mold closing, heat sealing, film cutting and film closing, etc.
Put the box → press the switch → enter the lower mold (in place) → close the upper mold with the lower mold (in place) → remove the natural air → fill in the mixed fresh-keeping gas (N2, O2, CO2, etc.) (complete) → seal, Film cutting → deflation → separation of the upper and lower molds → exit of the lower mold, ejection of the packaged product → take out the finished product.
Ordinary sealing principle: upper and lower mold clamping → sealing and film cutting (completed) → exit of the lower mold, ejection of the packaged product.
Note: After deflation, the upper mold and lower mold are reset to complete a working cycle.
MIXING RATION:
According to different food characteristics, it is equipped with gas mixers with different gas types and fixed mixing ratios.
It can also be upgraded to a ternary gas mixer at an additional cost according to demand.
TECHNICAL PARAMETER:
| Model | IA-640/4GT |
| Brand | IACHIEVE |
| Production Speed | One out of four : 5-6 time/m (normal sealing) 4-5 time/m (with gas flushing) |
| Sealing Diameter (Max) | 220 x 140 x 80mm |
| Working pressure | 0.6Mpa |
| Accuracy | <1% |
| Mixed gas | 2 types |
| Pneumatic part | AirTac |
| Outer Shell Part | 304 |
| Mold Part | Fine grinding oxidized aluminum alloy acid-resistant aluminum mold |
| Mixer | German Wittur fixed ratio mixer |
| Power Source | 0.4~0.6MPa |
| Voltage | 220v Single Phase 50Hz 3kw |
| Machine Size | 1370 x 930 x 1377mm |
| Net Weight | 240kg |
PRECAUTION:
- The machine must be grounded before use.
- Pay attention to safety, the internal mold of the machine is high temperature, do not put your hands into it when it is in standby and powered on.
- In case of emergency, directly tap the red emergency stop button.
- Be sure to turn off the power when installing the parafilm.
- If sealing for the first time, the temperature should be from low to high
- When placing the machine into the machine, the four feet must be leveled first, and the ground surface must be firm.
- Regularly add butter to the guide post to reduce the wear of the parts.
- Clean up after get off work every day, especially the ironing board, cutter, working surface of the equipment, conveyor belt and motor.
